Ashland Skatewheel Conveyor Selection Guide

Skatewheel Conveyor Selection Guide

Skatewheel Conveyors

Skatewheel conveyors will convey lightweight loads that have firm flat bottoms such as cartons, totes, cases, etc. Skatewheel conveyors “roll” easier than roller conveyors allowing for lighter packages and less slope. The individual wheels in the curved sections also allow packages to track more so than roller conveyor. These conveyors are used to transport lightweight packages or for operations that require lightweight sections. Primarily they are used in shipping departments, stocking areas, assembly lines, etc. Hook & rod couplers along with tripod supports make it ideal for temporary set-up.

Our skatewheel sections come in 5’ and 10’ lengths as well as 45 and 90 degree curves. These models can be installed permanently or used for temporary set-ups. We provide multiple widths and wheel densities to ensure your products will move smoothly along the conveyor. Although we cannot meet every wheel pattern, density, and frame combination, take a look through this guide to learn how to choose the right skatewheel conveyor for your application.

 

Skatewheel-3.jpg

Skatewheel Conveyor Model Summary

We have many combinations of lengths, widths, materials, and wheel patterns. Refer to the model below to see how we abbreviate our skatewheel conveyors.

SKWHPtExplan.webp

Choosing Your Conveyor

The best place to start when choosing a skatewheel conveyor is to determine the weight and dimensions of the product you wish to conveyor. This will narrow down the width, material, and wheel density that you will need for your conveyor.

Between Frame Dimension vs. Overall Width

Skatewheel conveyors are commonly referenced by their overall width rather than the between frame dimension where the wheels sit. At Ashland Conveyor, our skatewheel conveyors follow a general rule; the between frame dimensions is always 2” less than the overall width of the conveyor. While the conveyors are measured by their overall width, it is important to know the between frame dimension in order to help choose supports that are compatible with your conveyor.

Skatewheel_BF_vs_Overall_Width.webp

Frame Capacity, Materials, and Couplings

The frame must be capable of supporting both the conveyed items in addition to the frame and wheels. Each skatewheel conveyor will have capacities listed in their construction. These capacities are based on 10’ support centers and 5’ support centers. Having supports located every 5’ will increase the frame capacity, whereas having supports every 10’ will decrease the frame capacity.

We can provide different materials for the frames and wheels. The frames can be galvanized steel or aluminum and the wheels can be galvanized steel, aluminum, or black nylon. Aluminum frames and wheels can provide a lighter solution, but will reduce the capacity and increase the price per unit. The galvanized versions will give more capacity to allow for heavier products.

The standard couplers for skatewheel conveyors are hook and rod. Hook and rod couplers will come on skatewheels with widths from 12" to 30". However, hook and rod couplers are not available for wheel densities of 32 wheels per foot and more. This is because the wheels interfere with the coupler connection sites.

IMG_3618_2-scaled.webp
HookRod-1-scaled.webp

Curves

Often curves will determine the width of the conveyor system, as the product requires additional space to negotiate the turn. The additional space depends upon the length and width of the product. To find the proper skatewheel curve width, refer to the table below:

HelpSkatewheelCurveChart.webp

Wheel Density and Centers

Wheel density is described as wheels per foot. There must be a minimum of three axles and five wheels under the load at all times in order for the product to flow properly. Ashland Conveyor offers many different wheel densities at different widths to ensure that your product will move efficiently along your conveyor system.

HelpSkatewheelDensity.webp

Supports

Our conveyors do not come with the supports. Supports come in different styles and heights. It is possible to use our conveyors without supports and lay them directly on a flat, even surface. When pairing your conveyor with supports, you will need to match the between frame dimensions (except for tripod and low profile supports). The between frame dimension of a skatewheel conveyor is 2" less than the overall width. To learn how to select the correct supports for your conveyor click here.